Multi-Angle Anvil Cutter for Gaskets and Trim
Product Description
Product Detail
Multi-Angle Anvil Cutter for Gaskets and Trim – 6-Angle Mitre Shear for UPVC, Conduit, Plastic Pipe and Picture Moldings | Model KXT GC
|
The Multi-Angle Anvil Cutter for Gaskets and Trim (Model KXT GC) is a 6-angle mitre shear designed for glazers, gasket fitters, sign-makers and maintenance engineers who need clean, burr-free cuts at precise angles. It cuts through UPVC gasket, trims, conduit, beading, plastic pipe and picture moldings — the kind of work that hand saws and utility knives handle poorly. Unlike a fixed-angle shear, the Multi-Angle Anvil Cutter for Gaskets and Trim gives six positive cutting angles in a single tool: 45°, 60°, 75°, 90°, 105° and 120°. That means one tool replaces a box of mitre boxes, and the fitter never has to guess whether the cut is truly square. Blades are changed in seconds without tools, and a safety locking handle keeps the shear closed when not in use — a practical detail that matters on site and in the van. |
|
Six Cutting Angles – One Tool
Every angle marked on the Multi-Angle Anvil Cutter for Gaskets and Trim is a positive stop — no measuring, no marking, no risk of a drifting cut. The chart below shows the six settings and the typical trim and gasket jobs each one is used for.
|
45°
STANDARD MITRE
|
60°
STEEP CORNER
|
75°
TIGHT TRIM
|
90°
SQUARE CUT
|
105°
OPEN CORNER
|
120°
FLAT JOINT
|
What the Multi-Angle Anvil Cutter Cuts
|
UPVC Gasket & Trims
The most common job for the Multi-Angle Anvil Cutter for Gaskets and Trim — clean corners on UPVC window and door trims without cracking the profile. |
Conduit & Plastic Pipe
Cuts electrical conduit and small-bore plastic pipe squarely, ready for gluing or fitting without a second trimming pass. |
|
Beading & Picture Moldings
Fine trim and beading at 45° and 60° corners — the six-angle layout gives frame-makers a repeatable result without a mitre saw. |
Gasket Materials
Soft gasket sheet, rubber strip and non-asbestos jointing — the anvil action of the Multi-Angle Anvil Cutter for Gaskets and Trim leaves a clean edge without tearing. |
Design and Safety Features
| A | Positive Angle Stops Six factory-set stops at 45°, 60°, 75°, 90°, 105° and 120° — the operator simply selects and cuts. No marking, no measuring, no drift. |
| B | Easy-Change Blades The blade on the Multi-Angle Anvil Cutter for Gaskets and Trim is replaced without tools — a full spare blade set can be swapped on site in under a minute. |
| C | Safety Locking Handle The shear closes and locks when not in use — a deliberate design choice for the Multi-Angle Anvil Cutter for Gaskets and Trim, and an important safety feature in a busy workshop. |
| D | Non-Slip Grip Handle Moulded non-slip grip keeps the Multi-Angle Anvil Cutter for Gaskets and Trim steady during the cut, even with gloved hands or in damp workshop conditions. |
Technical Specifications – KXT GC
| Parameter | Specification |
| Model | KXT GC |
| Product Type | Multi-angle anvil cutter / mitre shear |
| Cutting Angles | 45°, 60°, 75°, 90°, 105°, 120° |
| Materials Cut | UPVC gasket, trims, conduit, beading, plastic pipe, picture moldings, soft gasket sheet |
| Blade Change | Tool-free — blades replaced by hand in under a minute |
| Handle | Non-slip grip; safety lock keeps shear closed when not in use |
| Body | Anvil body with machined angle stops |
| Packing | Individual box; export carton on request |
Who Uses the Multi-Angle Anvil Cutter for Gaskets and Trim
| Glazers and Window Fitters Cuts UPVC trim, beading and gasket at the correct angle in one pass — the Multi-Angle Anvil Cutter for Gaskets and Trim keeps the van load light and the job moving. | Maintenance and MRO Teams For on-site gasket trimming and pipe cutting, the Multi-Angle Anvil Cutter for Gaskets and Trim replaces a full mitre box and a hand saw without sacrificing accuracy. |
| Sign-Makers and Framers Accurate 45° and 60° corners on beading and picture molding — the Multi-Angle Anvil Cutter for Gaskets and Trim gives a repeatable mitre every time. | Electrical and Plumbing Trades Square cuts on conduit and small-bore plastic pipe — the Multi-Angle Anvil Cutter for Gaskets and Trim is a practical tool-box companion for the service van. |
|
Get Your Multi-Angle Anvil Cutter Quotation
Tell us the quantity, packing requirement and destination port — we reply within 24 hours with FOB pricing, lead time and a free sample offer.
|
Send Inquiry All Gasket Tools |
Frequently Asked Questions
Related tools: Hand Cutter for Soft Gaskets, Gasket Cutter, Gasket Punch Set and 9-Piece Punch and Die Set.