Expanded PTFE Joint Sealant Gasket Tape with adhesive
Product Description
Product Detail
Expanded PTFE Joint Sealant Gasket Tape with adhesive
Expanded PTFE Joint Sealant Gasket Tape with adhesive is a highly fibrillated expanded PTFE form-in-place sealant for gasketed joints. Supplied on
spools, it is not dependent on flange dimensions. Expanded PTFE Joint Sealant Gasket Tape with adhesive comes in various thicknesses with a high
quality adhesive backing to easy in installation and is ideal for worn flanges of all sizes. It exhibits flexibility, compressibility, stability under high temper
and high tensile strength. Expanded PTFE Joint Sealant Gasket Tape with adhesive is chemically inert and resists creep relaxation to maintain a tight
seal. Expanded PTFE Joint Sealant Gasket Tape with adhesive conforms to FDA requirements. Expanded PTFE sealant gasket tape with adhesives
is easily cut with scissors to the correct length. The adhesive backing holds the sealant in place while position around the flange inside the bolt circle
to isolate the flow media. The ends should overlap 3/4″ to 1″ on either side of a bolt to ensure leak-tight performance. It is recommended to use a size
about 40-50% of the sealing surface.
Application:
Non-standard or complex flange shapes, Steam vessel flanges, Water systems, Pump or compressor housing flanges, Most flanges and joints,
even with worn or uneven surfaces
Data sheet
Temperature |
-268 oC~260 oC |
Pressure range |
100 bar |
Thickness |
0.5mm-10mm |
Width |
3mm--100mm |
Density |
0.7 g/cm3~0.8 g/cm3 |
PH |
0~14 |
Width (mm) |
Thick (mm) |
Length (m) |
Width (mm) |
Thick (mm) |
Length (m) |
3 |
1.5 |
30 |
17 |
6 |
30 |
3 |
2 |
30 |
20 |
7 |
30 |
4 |
2 |
30 |
22 |
7 |
30 |
5 |
3 |
25 |
25 |
8 |
25 |
5 |
2 |
25 |
28 |
5 |
25 |
7 |
2.5 |
20 |
30 |
5 |
20 |
7 |
3 |
20 |
40 |
4 |
20 |
8 |
3 |
10 |
50 |
4 |
10 |
9 |
4 |
10 |
60 |
3 |
10 |
10 |
3 |
20 |
70 |
3 |
20 |
10 |
4 |
10 |
80 |
2.5 |
10 |
12 |
4 |
6 |
100 |
2 |
6 |
14 |
5 |
6 |
100 |
1.5 |
6 |
16 |
5 |
3 |
100 |
1 |
3 |