18 Carrier Square Braider with 3 Orbits
Product Description
Product Detail
18 Carrier Square Braider with 3 Orbits: Specifications, Output & Buying Guide
The KXT-18PB is an 18 carrier square braider with 3 orbits designed for continuous production of square-section braided packing in the 6 mm to 16 mm range. It is driven by a 0.75 kW motor on a 380 V / 50 Hz supply, stands on a compact 1 × 1 × 1.9 m footprint, weighs approximately 300 kg and produces 6–20 kg of finished packing per day. Output depends on the yarn you braid, the cross-section you run and the experience of the operator, so we quote realistic daily capacity for your material before you order.
Machine Specifications at a Glance
| Model | KXT-18PB |
|---|---|
| Machine type | Square braider (square braiding machine) with 3 orbits |
| Carrier count | 18 carriers |
| Working range | 6–16 mm square cross-section |
| Power supply | 380 V, 50 Hz (other voltages available on request) |
| Motor power | 0.75 kW |
| Overall dimensions | L × W × H = 1 × 1 × 1.9 m |
| Net weight | Approx. 300 kg |
| Daily output | 6–20 kg/day, depending on yarn, size and operator |
| Optional version | 16RB carrier round braider available on request |
Figures above describe the standard build. If your plant runs on 220 V / 60 Hz, or you need a different braiding range, tell us before the machine is assembled and we will configure the drive and tooling to match.
What the 3-Orbit Braid Structure Changes on the Shop Floor
Orbits are the tracks along which the yarn carriers cross each other. Going from 2 orbits to 3 orbits shortens the crossing distance, so more yarn is laid per unit length. On an 18 carrier machine this normally gives a firmer, more dimensionally stable square packing with cleaner corners — the property buyers judge first when they unpack a box.
Tighter braid, better corners
Three crossing tracks pull the yarn evenly against the square forming die, so the four faces stay flat and the edges do not round off during coiling.
Balanced output
A 3-orbit structure braids denser than a 2-orbit machine without pushing the 0.75 kW motor harder, which keeps daily output steady across a full shift.
Predictable size control
Because the braid is denser, finished packing holds its nominal 6–16 mm section after cutting, reducing rejection at the packing bench.
Which Braiding Materials This Square Braider Runs
The 18 carrier square braider with 3 orbits is used across the whole family of braided packings. In our own workshop the machine is normally set up for:
- Graphite packing — the most common setup; dense square section for high-temperature valve stems.
- PTFE and graphite-filled PTFE packing — for chemical pumps and lower-friction service.
- Aramid and carbon fibre packing — higher tenacity yarns for abrasive or high-pressure duties.
- Synthetic, mineral and vegetable fibre packing — general sealing and utility applications.
Yarn count, spool tension and forming-die size are the three settings that decide final quality. We supply the die set matched to the size you plan to run most often, and operators can change between 6 mm and 16 mm sections in a normal maintenance window — see the graphite packing range for the finished product these machines are usually built around.
Who Buys This Machine, and What It Sits Next To
Most enquiries come from three groups: packing manufacturers adding a second or third braiding line, sealing distributors who want to control quality instead of buying finished packing, and maintenance workshops servicing their own valve stock. The usual line configuration is one 18 carrier square braider for mid-size sections, an 24 carrier square braider with 4 orbits for larger cross-sections, and a smaller 8 carrier unit for thin packing.
The full equipment range, including spiral-wound and cut gasket machinery that is often ordered in the same container, is listed under machines for braiding packing.
Ordering, Packing and Delivery
Every unit is assembled, wired and run-tested at our Ningbo plant before it is dismantled for export packing. The machine ships in an export wooden case with the forming die set, a spare set of wear parts, an operation manual in English and the wiring diagram. We can also supply a short video of your machine running on your chosen yarn before it leaves the factory.
If you need a 16RB carrier round braider alongside the square machine, or a custom voltage, note it in the enquiry form and we will confirm the configuration, price and lead time in writing.
Frequently Asked Questions
What size of packing can the 18 carrier square braider with 3 orbits produce?
The standard machine braids square packing from 6 mm up to 16 mm. Other sizes are a question of forming-die and yarn count — tell us the section you need and we will confirm whether it needs a different model.
How much does it produce per day?
6–20 kg per day. Graphite and PTFE yarns typically run faster than aramid or carbon; thicker sections are slower than thin ones. The figure is a working range, not a laboratory maximum.
Can the machine run on 220 V or 60 Hz?
Yes. 380 V / 50 Hz is the standard build, and we configure the motor and control circuit for other supply voltages when the order is placed.
How much floor space does it need?
The machine occupies 1 × 1 m and is 1.9 m tall, weighing about 300 kg. A normal workshop floor is sufficient; leave working space around the spool rack for loading.
Do you supply a round braider as well?
Yes — a 16RB carrier round braider is available on request for round packing, hose reinforcement or rope-braiding work.
How do I get a quotation?
Send us the packing size range, the yarn type, the supply voltage and your target daily output through the inquiry form. We will reply within one working day with a configured quotation.
Get a Configured Quotation for the KXT-18PB
Send your packing size range, yarn type and supply voltage — we will reply within one working day with price, lead time and shipping options.